2019年9月15日星期日

How to extend the service life of sand making machine parts


In the crushing production process, the damage caused to the sand making machine is very different depending on the material and the use situation. Reasonable use of different crushers When crushing different materials, select the appropriate machinery for corresponding crushing, which can avoid premature failure of the fittings. Uniform selection of materials can also reduce the loss of equipment and make the equipment longer.

As a manufacturer, after careful study and practice of the sand making machine, a detailed understanding of the relatively large points of the wear parts of the sand making machine was carried out, and at the same time, the wear of different positions during the running process was also carried out. The relevant records have made a summary of the problems that are prone to wear and tear during our use.



1. During the material crushing process of the sand making machine, the higher the hardness of the material, the more serious the damage to our equipment in the crushing production. The quality of the equipment is an important aspect when we make equipment purchases, and it is also important to select the right equipment for the different materials.


2. In the material, if the moisture content of the material is too large, the surface of the equipment that is easy to adhere during the crushing will cause the crushing strength of the equipment to decrease and the material transportation function to decrease, resulting in uneven production.

3. During the use of the sand making machine, the uniform speed in the crushing process can better reduce the damage of the equipment and ensure that the equipment can be used for our production for a longer time.

4, the choice of sand machine parts replacement is essential, high-quality parts in the process of use, can be better, more long-term use for crushing production, while at the same time can reduce the damage of the parts.



Zhongxin Sand Making Machine
Type:Tertiary Crusher
Input Size:30mm--50mm
Capacity:60-450 TPH


if you need , you can contact me,
my email:sales@hicrusher.com,
phone:0086-371-676660555.
whatsapp/wechat: 0086-13676922906,
our website: https://www.zxcrusher.com/crushing-equipment/sand-making-machine.html

2019年9月11日星期三

stone crushing production line, river stone crushing plant,cone crusher





Zhongxin stone crushing production line, river stone crushing plant,cone crusher



if you need , you can contact me,

my email:sales@hicrusher.com,

phone:0086-371-676660555.

whatsapp/wechat: 0086-13676922906,

our website: https://www.zxcrusher.com/products/

2019年9月10日星期二

How to solve the rocking phenomenon that occurs during the use of the sand making machine

How to solve the rocking phenomenon that occurs during the use of the sand making machine

The sand making machine can make various kinds of rock, sandstone and river pebbles to be used for construction sand with various grain sizes. The sand has a uniform plasmid degree and high compressive strength, far more than the sand produced by natural sand and ordinary hammer sanding machine. Meet the building requirements and improve the quality of the building. The sand making machine has the characteristics of reliable performance, reasonable design, convenient operation and high work efficiency.

If the sand making machine is severely oscillated during work, then there are three possible reasons:

1. The sand making machine may also have obstructions in the impeller flow passage. If there is obstruction in the impeller flow passage, the feeding will be uneven, and the body swings too much. As long as the obstruction on the impeller flow passage is taken out, the body swing can be solved. Too big a problem.

2. It may be that the equipment is too large to cause excessive swinging of the material. When the sand making machine is designed, the feeding size of the equipment is generally 4 to 5 cm. Generally, when the feeding size of the equipment is 3 to 4 cm. The amount of finished sand can be much higher. If the feeding is too large, the equipment will swing too much. If the feeding is too small, the collision is not enough and it is difficult to reach the finished sand.

3. It may be that the wearing parts on the impeller of the sand making machine are worn more seriously. If the wearing parts of the impeller are seriously worn, the internal operation of the sand making machine will be unstable, causing the swing to be too large. At this time, as long as the wearing parts are replaced, the internal impeller of the sand making machine can be balanced.


Zhongxin Sand Making Machine is shipping.

if you need , you can contact me,
my email:sales@hicrusher.com,
phone:0086-371-676660555.
whatsapp/wechat: 0086-13676922906,
our website: https://www.zxcrusher.com/crushing-equipment/sand-making-machine.html






2019年9月9日星期一

1200tph stone crushing production line, hydraulic cone crusher,





1200tph stone crushing production line, hydraulic cone crusher, Single Cylinder Hydraulic Cone Crusher



if you need , you can contact me,

my email:sales@hicrusher.com,

phone:0086-371-676660555.

whatsapp/wechat: 0086-13676922906,

our website: https://www.zxcrusher.com/products/

2019年9月8日星期日

Zhongxin ZX1650 Compound Cone Crusher is shipping.

Zhongxin ZX Compound Cone Crusher is shipping.

Model:ZX1650,Cavity Type:Coarse,Stroke(mm):34,Max.Feeding Size(mm):300,Discharging Opening Adjusted Scope(mm):35-65,Capacity(t/h):280-610,Motor Power(kw):250,Weight(t):35.

if you need , you can contact me,
my email:sales@hicrusher.com,
phone:0086-371-676660555.
whatsapp/wechat: 0086-13676922906,
our website: https://www.zxcrusher.com/cone-crusher-machine/zx-compound-cone-crusher.html





2019年9月6日星期五

Zhongxin PEX250*1200 jaw crusher is shipping

Zhongxin PEX250*1200 jaw crusher is shipping.
Model:PEX-250*1000,Feeding size(mm):250*1000,Max feeding size(mm):210,Discharging Range size(mm):25-60,Capacity (t/h):16-52,Motor power(kw):30-37,Weight (t):6.5,Overall dimension(LxWxH)(mm):1530x1992x1380.

if you need , you can contact me,
my email:sales@hicrusher.com,
phone:0086-371-676660555.
whatsapp/wechat: 0086-13676922906,
our website: https://www.zxcrusher.com/crushing-equipment/jaw-crusher.html





2019年9月4日星期三

Zhongxin Impact Crusher Type:Secondary Crushing Capacity:30-250TPH

Zhongxin Impact Crusher
Type:Secondary Crushing
Capacity:30-250TPH
Input Size:400mm--1520mm

if you need , you can contact me,
my email:sales@hicrusher.com,
phone:0086-371-676660555.
whatsapp/wechat: 0086-13676922906,
our website: https://www.zxcrusher.com/crushing-equipment/impact-crusher.html