Crusher maintenance method

Proper care and maintenance of broken equipment can improve their work efficiency, extend equipment life, then how do the crusher maintenance work? Specific maintenance is as follows:

     1. Check. Crusher in the work process, you should first do the daily work of the inspection, when the new machine into operation, the staff on duty before work on the machine must conduct a comprehensive inspection. Check the contents, including equipment motors, the fixed part of the fastening, belt drive, bearing seals. The case of electrical switches. The machine must Weekly major parts such as board hammer, impact liner, liner wear inspection. If it is found during the inspection of serious wear parts should be promptly replaced.

     2, lubrication. Constant attention and timely manner lubrication friction surface can effectively extend the life of the equipment. Used lubricating oil, should be determined according to place of use of the machine, the temperature and other conditions, may generally be calcium - sodium based lubricants, each working eight hours after filling oil to the bearing once every three months to replace lubrication fat once, apply oil change clean gasoline or kerosene carefully cleaned bearing, added grease inside the bearing 50% by volume.

     3, the adjustment. In the course of their work but also to adjust the timing to do work-related parts, regular liner gap between the rotor and the counter is adjusted, it can effectively control the discharge particle size, to provide users with qualified materials. In addition adjustment should regularly check the bottom of the inlet gap between the hammer and the plate, adjust it, should Remove the sides of the steel frame, and then out of the steel, and then transferred to the rotation.

     4, maintenance. Crusher maintenance and ultimately to the crusher maintenance and timely repair of minor faults, can reduce the rate of replacement parts. Crusher maintenance work, including minor repairs, repair and overhaul, which should be repaired in the specific operation depending on the circumstances.