Cone Crusher different parts have different lubrication requirements

Good lubrication can guarantee the normal life of the cone crusher, effectively reducing the friction between the parts, we need to note that the cone crusher lubrication requirements of different parts is not the same, too much or too little will affect the life of the equipment and efficiency, the following Zhongxin will give you a brief introduction of the spring cone crusher lubrication requirements.

Spring cone crusher support sleeve is generally saw type thread, and the liner was screwed into the thread by rotating around the ring to adjust the size of the mine discharge port, because of its shape thread lubrication caused more complex, so often artificial lubrication, this can effectively ensure good lubrication components.

For lubrication spring cone crusher eccentric, spherical bearings and gears, the need to use thin oil circulation lubrication way, such lubrication is sucked from the mailbox main shut-off valve to the pump through the lubricating oil in through the filter, from two a shutoff valve into the cooler to form a two-way, flow through the gap clearance bevel gear shaft and the lower portion of the eccentric bushing and the eccentric bushing cone and straight between the liner and then back to the tank.

These are technical engineers Zhongxin lubricated parts against common method proposed, if you are experiencing problems in other lubricating actual production use, you can inquire us.

Limestone processing

Limestone processing is designed by Shanghai Sanme absorbing advanced technology domestic and aboard, it has the features of simple structure, high reduction rate, high output, light weight and cubic particle of crushed material, etc.

Applicable material:
It is suitable for primary, secondary and tertiary crushing of middle hard and soft rock such as limestone, dolomite, marl,sandstone and clinker, etc.

Application:
It is applied for primary, secondary and tertiary crushing of various middle hard materials in the industries of chemical, cement, building and refractory.

Equipments:
Vibrating feeder, jaw crusher, impact crusher, vibrating screen, belt conveyor.

Limestone introduction
Limestone is the trade name of limestone as mining raw material, it has a very wide distribution with abundant reserves, it is an important road construction material, and also it is an important material for calcinating lime and cement, it is an indispensable high calcium lime to metallurgical industry, after ultrafine grinding, high quality limestone can be widely applied in the production of paper making, rubber, paint, coating, medical, cosmetic, feed, sealing, adhesion, polishing. The compressive strength of limestone is typically about 150 MPa, it belongs to soft rock, and therefore impact crusher is adopted for the production process of limestone processing. The proven Hazemag impact crusher is used in Sanme limestone processing, it is a new type of impact crusher with high efficiency, and is suitable for crushing limestone and sandstone, 95% of crushed material＜45mm.

Basic process of limestone processing:
firstly, the stone will be evenly conveyed by feeder to jaw crusher for primary crushing, after primary crushing, the semi-product will be conveyed by belt conveyor to impact crusher for further crushing, after secondary crushing, the stone will be conveyed by belt conveyor to vibrating screen for sorting, different sizes of stone are sorted, the stone with desirable particle size will be conveyed to the final product pile, oversize will be conveyed by belt conveyor to impact crusher for crushing again, and closed circulation is formed.

Features of limestone processing:
The limestone processing has the features of high crushing efficiency, low power consumption, easy adaptation (particularly in crushing brittle material with middle hardness), and high crushing ratio, the process has been simplified to save the investment. Sanme can provide customers with comprehensive process solution and technical support, and also can design non-standard parts according to actual installation conditions of customer.