Mining equipment cone crusher lubrication system how to repair

Cone crusher internal lubrication system is an important means of the device to ensure the normal operation of the lubrication system is a necessary condition for normal production equipment, let's look at the four elements cone crusher lubrication system works.

A suitable working temperature:

In the course of the cone crusher, the oil should be kept in the range of 38-55 degrees, higher than 60 degrees is not allowed at or below 16 degrees environment. In the actual production process, the available thermometer into the return oil pipe inside the channel, if more than 28 degrees is necessary to attract attention, because it may cause cone crusher bush-burning.

Second, a reasonable working pressure:

When the lubrication system working properly, the maximum working pressure of lubricating oil and cooling water are 0.18MPa. Exhaust valve lubrication system is installed in the drive shaft holder, the exhaust valve allows the same internal and external atmospheric pressure cone crusher, so you can ensure the smooth discharge lubricant.

Third, the correct choice of lubricants:

Winter sports can be lower viscosity oil, summer may be slightly higher kinematic viscosity oil.

Fourth, the fuel adjustment：

Cone crusher amount of lubricating oil is controlled by adjusting the valve lubricant station by adjusting the pressure, amount of lubricating oil into the interior of the drive shaft holder portion is observed through the oil flow indicator adjustment. It should be noted that although the oil flow indicator can be observed within the oil flow, but can not ensure that the internal cone crusher must have oil. Also we need to observe the return line back to the fuel, lubrication station appropriately adjust the pressure on the control valve to ensure proper lubrication oil return to ensure the normal operation of the lubrication system.