Cone crusher internal lubrication system is an important means of the device to ensure the normal operation of the lubrication system is a necessary condition for normal production equipment, let's look at the four elements cone crusher lubrication system works.
A suitable working temperature:
In the course of the cone crusher, the oil should be kept in the range of 38-55 degrees, higher than 60 degrees is not allowed at or below 16 degrees environment. In the actual production process, the available thermometer into the return oil pipe inside the channel, if more than 28 degrees is necessary to attract attention, because it may cause cone crusher bush-burning.
Second, a reasonable working pressure:
When the lubrication system working properly, the maximum working pressure of lubricating oil and cooling water are 0.18MPa. Exhaust valve lubrication system is installed in the drive shaft holder, the exhaust valve allows the same internal and external atmospheric pressure cone crusher, so you can ensure the smooth discharge lubricant.
Third, the correct choice of lubricants:
Winter sports can be lower viscosity oil, summer may be slightly higher kinematic viscosity oil.
Fourth, the fuel adjustment：
Cone crusher amount of lubricating oil is controlled by adjusting the valve lubricant station by adjusting the pressure, amount of lubricating oil into the interior of the drive shaft holder portion is observed through the oil flow indicator adjustment. It should be noted that although the oil flow indicator can be observed within the oil flow, but can not ensure that the internal cone crusher must have oil. Also we need to observe the return line back to the fuel, lubrication station appropriately adjust the pressure on the control valve to ensure proper lubrication oil return to ensure the normal operation of the lubrication system.
2015年7月23日星期四
Hst Series Single Cylinder Hydraulic Cone Crusher Rock Crusher (DP-250S)
Product：
Hydraulic Cone Crusher Product Description
Spring cone crusher is suitable to crush all kinds of ores and rocks with medium hardness and above. It has features of reliable structure,high efficiency,high capacity,low operating cost,easy adjustment ,economical to use and so on. Spring system plays the role of overload protection, which will enable the exotic materials or steel piece to pass through the crushing chamber without any damage to the machine. It adopts grease seal to isolate dust and lubricants, therefore ensure its reliable operation. According to customer demand, respectively, using standard type, medium type and short head type for coarse crushing, medium crushing and fine crushing operation.Hydraulic Cone Crusher Specifications:
| Type |
Dia. of Cone
(mm)
|
Adjusting Range
of Discharge Opening
(mm)
|
Max Feed Size
(mm)
| Capacity (t/h) | Motor Power (kw) | Weight (t) |
Overall Dimension
(mm)
|
| PYB-600 | 600 | 12-25 | 65 | 15-25 | 30 | 5.5 | 1740×1225×1940 |
| PYD-600 | 3-13 | 36 | 5-23 | 30 | 5.5 | 1740×1225×1940 | |
| PYB-900 | 900 | 15-50 | 115 | 50-90 | 55 | 10.18 | 1990×1640×2380 |
| PYZ-900 | 5-20 | 60 | 20-65 | 55 | 10.19 | 1990×1640×2380 | |
| PYD-900 | 3-13 | 40 | 15-50 | 55 | 10.27 | 1990×1640×2380 | |
| PYB-1200 | 1200 | 20-50 | 145 | 110-200 | 110 | 24.7 | 2805×2300×2980 |
| PYZ-1200 | 8-26 | 100 | 50-150 | 110 | 25 | 2805×2300×2980 | |
| PYD-1200 | 3-15 | 50 | 18-105 | 110 | 25.6 | 2805×2300×2980 | |
| PYB-1750 | 1750 | 25-60 | 215 | 280-480 | 155-160 | 50.6 | 3610×2950×4185 |
| PYZ-1750 | 10-30 | 185 | 115-320 | 155-160 | 51 | 3610×2950×4185 | |
| PYD-1750 | 5-15 | 85 | 75-230 | 155-160 | 50.5 | 3610×2950×4185 | |
| PYB-2200 | 2200 | 30-60 | 300 | 590-1000 | 260-280 | 84 | 4790×3430×5080 |
| PYZ-2200 | 10-30 | 235 | 200-580 | 260-280 | 85 | 4790×3430×5080 | |
| PYD-2200 | 5-16 | 110 | 120-370 | 260-280 | 85 | 4790×3430×485 |
2015年7月15日星期三
DP single cylinder cone crusher Advantages
DP single cylinder cone crusher is Xin Heavy machinery exclusively designed and produced the series crusher into PYB, PYZ, PYD three types, one for rough broken, broken, broken bits. It can be a very good material crushing to the desired particle size range, and meet the production needs of customers.
The device is an improved device, the device designed to be simple, strong crushing capacity, low operating costs, broken crushing ratio, uniform particle size, DP single cylinder cone crusher for secondary and tertiary crushing all kinds of minerals, rocks, Widely used in black, nonferrous metals, nonmetal mining and sand and gravel and other industrial fields.
DP single cylinder cone crusher applied to metallurgy, construction, road building, chemical and silicate industry for crushing of raw materials, can crushing medium and above medium hardness ores and rocks. When the single-cylinder cone crusher, rotary motor through the pulley or coupling, shaft and conical part in forcing the eccentric motion around a week at a fixed point for rotating pendulum motion. When the material is added to the crushing chamber, the spindle assembly in the resistance material in the eccentric copper sleeve slow rotation. When the crusher falls within the broken piece of metal and other non-object, single cylinder cone crusher dynamic cone from the bottom of the hydraulic piston hold, play outfall adjustment and over iron protection, repeatedly landing rule out blocking mine action.
Motor driven single-cylinder cone crusher pinions, pinion driven large gear, large gear assembly driven eccentric sleeve assembly and spindle assembly theoretical vertical line as the center, in a copper liner revolution, spindle assembly eccentric copper sleeve to the spindle The centerline of rotation can be achieved.
If you prefer you can contact us:
The device is an improved device, the device designed to be simple, strong crushing capacity, low operating costs, broken crushing ratio, uniform particle size, DP single cylinder cone crusher for secondary and tertiary crushing all kinds of minerals, rocks, Widely used in black, nonferrous metals, nonmetal mining and sand and gravel and other industrial fields.
DP single cylinder cone crusher applied to metallurgy, construction, road building, chemical and silicate industry for crushing of raw materials, can crushing medium and above medium hardness ores and rocks. When the single-cylinder cone crusher, rotary motor through the pulley or coupling, shaft and conical part in forcing the eccentric motion around a week at a fixed point for rotating pendulum motion. When the material is added to the crushing chamber, the spindle assembly in the resistance material in the eccentric copper sleeve slow rotation. When the crusher falls within the broken piece of metal and other non-object, single cylinder cone crusher dynamic cone from the bottom of the hydraulic piston hold, play outfall adjustment and over iron protection, repeatedly landing rule out blocking mine action.
Motor driven single-cylinder cone crusher pinions, pinion driven large gear, large gear assembly driven eccentric sleeve assembly and spindle assembly theoretical vertical line as the center, in a copper liner revolution, spindle assembly eccentric copper sleeve to the spindle The centerline of rotation can be achieved.
If you prefer you can contact us:
| Tel: | +86-371-67660555 |
| Email: | sales@zxcrusher.com |
| Skype: | jzxhkj |
50tph Pebble Sand Making Production Line In India
Equipment Configuration of Granite Crushing Plant:
ZSW series vibrating feeder + PE series jaw crusher + VSI series vertical shaft impact crusher + Belt conveyor + YK series circular vibrating screen.
50t/h cobble sand making production line in India
Regarding of detail condition, two kinds of techniques are usually adopted in producing manufactured sand, dry way and wet way. Both methods can produce high quality manufactured sand as concrete aggregate. Especially, the dry way can produce not only the manufactured sand used in road surface, but also the powder used in asphalt concrete.
Features and Advantages of Sand Production Line:
[1]High degree of automation;
[2]Low operation cost with high rate of crushing;
[3]High Capacity with low pollution;
[4]Easy maintenance
[5]The manufacture sand meets the national standard of building sand. It is regular,
cubic shape and reasonable gradation of sand.
The configuration of equipments of manufactured sand is mainly based on customers requirements on dimension of finished sand, capacity and the purpose of the sand.
ZSW series vibrating feeder + PE series jaw crusher + VSI series vertical shaft impact crusher + Belt conveyor + YK series circular vibrating screen.
50t/h cobble sand making production line in India
Regarding of detail condition, two kinds of techniques are usually adopted in producing manufactured sand, dry way and wet way. Both methods can produce high quality manufactured sand as concrete aggregate. Especially, the dry way can produce not only the manufactured sand used in road surface, but also the powder used in asphalt concrete.
Features and Advantages of Sand Production Line:
[1]High degree of automation;
[2]Low operation cost with high rate of crushing;
[3]High Capacity with low pollution;
[4]Easy maintenance
[5]The manufacture sand meets the national standard of building sand. It is regular,
cubic shape and reasonable gradation of sand.
The configuration of equipments of manufactured sand is mainly based on customers requirements on dimension of finished sand, capacity and the purpose of the sand.
2015年7月13日星期一
Jaw crusher introduction
introduction：
Jaw crusher can reach the crushing ratio of 4-6 and the shape of final product is even. It is widely applied to crush high hardness, mid hardness and soft rocks and ores such as slag, construction materials, marble, etc. The pressure resistance strength is under 200Mpa, that is, suitable for primary crush. Jaw crusher can be used in mining, metallurgical industry, construction, road and railway building, conversancy, chemistry, etc.
This article published by the Jiaozuo Xin heavy machinery, please indicate the source!
2015年4月10日星期五
In 2015 Chinese cone crusher
We are the professional crusher manufacturer; our products were widely used in many key projects in our Country. And they also exported to South America, Middle Asia, Russia, Middle East etc.
With the increasing investment in the infrastructure construction, mining, energy and other industry, drive the other industry develop rapidly. After the financial crisis, China crushing and screen market experienced the tepid stage; it began to develop faster. Some experts have predicted that the future crushing machine develop will be lead up to a turning point after China government resort to economic stimulus packages.
The technique development of crushing machine industry will play critical importance in the whole heavy industry. With the improvement of science, there will be more and more different kind of crushers, such as jaw crusher, impact crusher, sand making machine, hammer crusher etc. and its usage also will be more and wider. Zhongxin Heavy Industry as the professional manufacturer of mining crushing equipment, supply first class service and professional techniques, ensure low invest and high yield. http://www.zxcrusher.es/
订阅：
博文 (Atom)